HMS243A/B

Products:

• hardness of 13 degrees A.

• music of a transparent and flexible.

• heating stereotypes facilitate the use of a short time.

• non-toxic, good chemical resistance.

• better weather resistance.

Uses:

For electronics packaging, filling, moisture, insulation or liner, trademarks, plastic

Specifications:

Hardness 13 ° A

Operating time> 240 minutes / 25 ℃

Ejection time, about 30 minutes 80 ℃

Tensile strength of 31 kgf / cm ^

450% elongation

Tear strength 13 kgf / cm

0.1% shrinkage

Hardener: HMS243B color: transparent liquid

Viscosity: 5,100 CPS Capacity: 500g

Mixing ratio of 1:1

Icon:

Main agent: HMS243A

Color: transparent liquid

Viscosity: 5,000 CPS

Capacity: 500g

Hardener: HMS 243B

Color: Transparent

Viscosity: 5,100 CPS

Capacity: 500g

Operation:

1. Will be the main agent of about 1 to 2 minutes stirring, the rotational speed of about 200 ~ 400rpm.

2. Will be the main agent and curing agent mixing about 1 to 2 minutes, speed of about 200 ~ 400 rpm.

3. The mixture (the main agent and curing agent) into the vacuum container vacuum of about 1 to 2 minutes, the exhaust about 2 times.

4. Remove the manipulation of natural flow into the mold level.

5.80 ℃ 30 minutes after baking completely stereotypes, the more temperature below 150 ℃ shorter aging time.